Homelink Wireless Control System - Hyundai IONIQ HYBRID Quick Reference Manual

FEATURES AND CONTROLS
If the vehicle Start/Stop button does not respond (it has no indicator
light) and the dash does not illuminate, the vehicle may be operated
after the 12V Battery Reset Switch is activated per the instructions
below.
1. Press the 12V Battery Reset switch to reconnect the 12V battery.
2. Start the vehicle within 15 seconds of pressing the 12V Battery
Reset switch.
3. After starting vehicle ( indicator on), operate the vehicle safely
outdoors stopped and/or drive it for 30 minutes total to charge
the 12V battery fully.
If the reset does not work due to over discharge of the 12V battery,
try to jump-start the vehicle. For more detailed information, please
refer to your Owner's Manual.
07 I Quick Reference Guide

HOMELINK WIRELESS CONTROL SYSTEM

Standard Programming
1. For first time programming, press and hold the two outside
buttons (
reprogram buttons, skip this step)
2. Press and hold the desired button (
transmitter's button at the same time until the Homelink
indicator light changes from a slow to a rapid blink.
(The transmitter has to be 1 to 3 inches away from the mirror)
The desired Homelink button is now programmed.
NOTE:
If you have a rolling code garage door opener, complete
additional steps:
3. Locate the "Learn" or "Smart" button on your garage door
opener. Press and release the button and complete Step 4
within 30 seconds.
4. Return to the vehicle and press the programmed Homelink
button up to 4 times (or until the garaged door operates)
For more detailed information, please refer to your Owner's manual or
visit www.homelink.com
HYUNDAI IONIQ HYBRID
, ) until the indicator light starts to flash. (to
,
or call (800) 355-3515
or )and your
Quick Reference Guide I 08