Page 1
LT791 Nexus™ Vessel Lavatory 24" x 17-3/8" Nexus™ Design Suite: Designed with matching toilet, and lavatories. Contemporary styling. Vessel design for easy installation Rear overflow Vitreous china vessel lavatory. Complete with installation template and sealing compound. LT791 Lavatory only with single hole. LT791.4 Lavatory only with 4"...
VESSEL LAVATORY INSTALLATION MANUAL BEFORE INSTALLATION If you are installing this product in a new construction or remodel, please make sure you are following all local plumbing and building codes. Carefully unpack and examine your new fixture for damage. To help insure that the installation process will proceed smoothly and correctly, please read these instructions carefully before you begin.
LAVATORY INSTALLATION (cont.) PREPARATION ■ Cut out the provided template along the inside of the cutting line. ■ Place the washers onto the tie hooks and install the wing nuts. ■ Place the template over the countertop and secure with adhesive tape. ■...
Product. (NOTE: Product model codes allow a maximum of 80 PSI. Check local codes or standards for requirements). e. Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of TOTO or which the Product is not specified to tolerate.