Combustion Chamber Cleaning; Fuel Tank And Filter Cleaning - Honda WB20XT2 Manual

dummyhead dummyhead
WB20XT2•WB30XT2

COMBUSTION CHAMBER CLEANING

Remove the cylinder head (page 12-3).
Clean any carbon deposits from the combustion
chamber (1).
Installation is in the reverse order of removal.

FUEL TANK AND FILTER CLEANING

Gasoline is highly flammable and explosive. You
can be burned or seriously injured when handling
fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
Remove the fuel tank (page 6-3).
Remove the fuel tank joint (1) and O-ring (2) from the
fuel tank (3).
Clean the fuel tank joint and fuel tank with non-
flammable solvent, and allow them to dry thoroughly.
Check the screen of the fuel tank joint for clogs or
damage, replace if necessary.
Install a new O-ring to the fuel tank joint and install them
to the fuel tank.
Tighten the fuel tank joint to the specified torque.
TORQUE: 2 N·m (0.2 kgf·m, 1.5 lbf·ft)
Install the fuel tank (page 6-3).
After installation, check for any signs of fuel leakage.
(1)
(2)
(1)
MAINTENANCE
(3)
3-9