Operation - Royal Sovereign HFN-50D Owner's Manual

Description
5
6
1
2

Operation

1. Plug the power cord into an electrical outlet and ensure the Master Power switch is 'ON'
2. Turn the heater ON by pressing the Mode/OFF on the control panel (Figure 4). To turn the heater
OFF press the Mode/OFF button.
Note: The fan may continue to operate when the unit is powered OFF for a while to cool off the
heating elements inside the heater to dissipate any retained heat. This is completely normal. The
unit will shut off automatically once complete.
3. Press MODE button to select LOW, HIGH, or AUTO heat selection. The control panel screen will
show below
LOW: 750 Watt Heater Setting
HIGH 1500 Watt Heater Setting
AUTO In AUTO Heater Setting, the heater will automatically adjust heat output to the room
surrounding until the set temperature is reached. The heater will automatically reduce the heat
output until the set temperature is attained. This helps reduce energy used and provides cost
savings.
3 4
1
Oscillation Button
2
Timer Button
Temperature and Timer Adjustment Button
3
Heat Setting and ON/OFF Button
4
5 Set Temperature
Room Temperature
6
Master Power Switch (not shown) – located at back
7
of unit
3