Using The Built-In Tuner - Zoom FIRE-36 Operation Manual

Using the built-in tuner

The FIRE-36 incorporates an auto-chromatic tuner which can be activated by pressing the
[TUNER] key.
1.
Press the [TUNER] key in the patch section.
The LED of the key lights up and the internal tuner becomes active.
If you want to tune while keeping the sound output on, press the [TUNER] key only briefly. (The
display indication shows "tU".) If you want to tune while the sound is muted, hold down the
[TUNER] key somewhat longer. (Release the key when the display indication shows "Mt".)
2.
Play the open string you want to tune
The left side of the display shows the note which is closest to the current pitch. The right side of
the display shows how far the pitch is off. Adjust the pitch while observing the display.
A 8
3.
To change the tuner reference pitch, press one of the [Q]/[W] keys.
The current reference pitch is shown for two seconds. The default setting is "40" (center A = 440
Hz).
4.
While the reference pitch is shown, you can use the [Q]/[
The setting range is 35 - 45 (center A = 435 Hz - 445 Hz).
ZOOM FIRE-36
T
Mute
M T
Hold down
Pitch is sharp Correct pitch Pitch is flat
A 8
4 0
Using the FIRE-36
The higher the rotation speed,
the more the pitch is off.
W
] keys to change the setting.
15