Neo Chair 801B Assembly Instruction

801B
ASSEMBLY
INSTRUCTION

Contents

Instructions

User Manual
Cautions
cs@hyggeinc.net
https://www.neochair.net
※Please Make sure all parts are included.
If not, email us cs@hyggeinc.net
BACK X1 SEAT X1 ARMREST X2
GAS LIFT
WHEEL X5 BASE X1
CYLINDER X1
Read the instructions carefully.
A
X4
(ARMREST)
B
X2
(BACK)
CONTROL
C X4
MECHANISM X1
(LOCKING)
D
X4
(WASHER)
ALLEN KEY X1
Please follow the assembly steps.
Instructions
※NOTICE
Under-tighten each bolt
make sure bolt holes aligned and tighten!
TIPS!
Use packaging box
for easier assembly.
STEP 2

Top

1
.
B
BOLTS
Under-
tighten
If there is any problem, do not hesitate to contact us with e-mail below.
STEP 1

Bottom

2
.
1
.
Use base legs as support
aiming the hole. Press it strongly.
(Be careful the tip of the leg might be sharp. Residue on the
surface is from welding finishes, not a defect of the product.)
2
.
D
A
BOLTS
cs@hyggeinc.net