Installing The Cable Glands And Stopping Plugs; Cable Glands; Unused Cable Inlets - Honeywell 954 SmartServo FlexLine Installation Manual

Installing the Cable Glands and Stopping Plugs

Seal unused cable inlets with approved ¾" NPT threaded stopping plugs.
Part No: 4417341 Revision 10
CAUTION!
Do not make any additional holes in the housing.
WARNING!
Make sure that no explosive gas mixtures build up in the working area.
WARNING!
Only use Ex e or flameproof certified materials of an appropriate IP value.
CAUTION!
Improper installation of cable glands or stopping plugs will invalidate the Ex approval of
the 954 SmartServo FlexLine.

5.4.1. Cable Glands

Use Ex e or Ex d 3/4" NPT cable glands (or where applicable equivalent conduit
connections) with an appropriate IP value. See the type plate on the device.
NOTE:
Install the cable glands according to the instructions provided by the manufacturer.

5.4.2. Unused Cable Inlets

Installation Manual
954 SmartServo FlexLine
25