Table of Contents
Advertisement
•
To access the camera via the Internet by connecting the camera to a router, it is necessary to assign
a respective HTTP port number for each camera and address translation by using the port forwarding
function of the router. For further information, refer to the operating instructions of the router in use.
Enter [Global IP address + :
(colon) + port number] in the
"Address" box of the browser
via the Internet.
vvv.xxx.yyy.zzz:50000
vvv.xxx.yyy.zzz:50001
Internet
(WAN)
2.8.2 Configure advanced network settings [Advanced]
Click the [Advanced] tab on the "Network" page. (®page 19, page 20)
The settings related to QoS can be configured in this section.
You can move to the setting page of a setting item by clicking the corresponding link for that setting item.
2.8.2.1 Configure the settings relating to the NTP server
The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured
on this page.
IMPORTANT
•
Use an NTP server when the more accurate time & date setting is required for the system operation.
WAN
Global address
vvv.xxx.yyy.zzz
Cable modem
XDSL modem
Router
LAN
Private address
192.168.0.254
Address translation using the port
forwarding function
vvv.xxx.yyy.zzz:50000 A 192.168.0.1:50000
Private address
192.168.0.1
Port number: 50000
Address translation using the port
forwarding function
vvv.xxx.yyy.zzz:50001 A 192.168.0.2:50001
Private address
192.168.0.2
Port number: 50001
2 Settings
Operating Instructions
61
Advertisement
Table of Contents
