Remote Control Key Functions - Zenith Z42PX21D Installation And Operating Manual

Remote Control Key Functions

Remote Control Key Functions
- When using the remote control, aim it at the remote control sensor on the TV.
• Rotates the input mode between Antenna
• Video, Front Video, Component 1-2, RGB-
DTV (or RGB-PC) and HDMI/DVI input
sources, screen returns to the last TV.
Selects the remote operating mode: TV,
DVD, VCR, AUDIO, CABLE or STB. Select
a mode other than TV, for the remote to
operate an external device.
Brings up the main menu to the screen.
Clears all on-screen displays and returns to
TV viewing from any menu.
Lets you select the amount of time before
your TV turns itself off automatically.
Switches the sound on or off.(Refer to p.42)
Selects a factory preset picture mode
depending on the viewing environment.
Selects the sound appropriate for the
program's character.
Installing Batteries
• Open the battery compartment cover on the back side and install the batteries
matching correct polarity (+ with +, - with -).
• Install two 1.5V AA batteries. Don't mix old or used batteries with new ones. Close
cover.
206-4022
TV INPUT
and Cable.
TV INPUT
MODE
MENU
EXIT
TIMER
MUTE
EZ PIC
EZ SOUND
TV/VIDEO
TV/VIDEO
External input modes rotate in regular
sequence: Antenna, Cable, Video, Front
MODE Video, Component 1-2, RGB-DTV (or
RGB-PC) and HDMI/DVI input sources.
(Video, Front Video, Component 1-2 input
sources are linked automatically, only if
these are connected )
GUIDE
RATIO
Changes the aspect ratio.
INFO
When you watch the TV, information dis-
plays on top of the screen. Not available
in Component 1-2, RGB and HDMI/DVI
mode. (Refer to p.41)
FAV
Scrolls the Favorite channels.
FLASHBK
FREEZE
FLASHBK
Tunes to the recent channels.
FREEZE
Freezes the currently-viewed picture.
Main picture is frozen.
Introduction
Owner's Manual 9