Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Tools Sold Separately
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20f
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools 60723
Summary of Contents for Harbor Freight Tools 60723
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Important Safety Information
4. Locate Workbench on a flat, level, solid surface If unreadable or missing, contact that is capable of supporting the weight of Harbor Freight Tools for a replacement. the workpiece, Workbench and tools. 10. People with pacemakers should consult their 5. -
Page 3: Grounded Tools: Tools With Three Prong Plugs
Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. 7. Protect the extension cords from sharp objects, excessive heat, and damp or wet areas. 60723 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 T5 13W 514 lb. evenly distributed as follows: Bench Top - 220 lb. Maximum Weight Bottom Shelf - 200 lb. Capacity Each Drawer - 25 lb. Top Shelf - 44 lb. Page 4 For technical questions, please call 1-888-866-5797. 60723...
- Page 5 Front Posts and the middle 2 holes on Back Posts. Note: Make sure the Front Top Beam carries the Warning Label and is right-side up. Figure B Warning Label Figure D 60723 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 15. Attach Left Shelf Beam (17L) and Right Shelf Beam (17R) to back Shelf Beam. 16. Attach Front Shelf Beam (16F) to Left and Right Shelf Beams. Figure F Figure H Page 6 For technical questions, please call 1-888-866-5797. 60723...
- Page 7 It will only connect one way. Route the cord through the hole in the Pegboard. Note: Make sure all Shelves are level. Then, tighten all Bolts and Screws securely. 60723 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Cleaning, Maintenance, And Lubrication
4. Rotate the Bulb 90º again to seat the bulb. Replace the cover. 2. Remove the Bulb by rotating it 90º, rolling in a forward or backward direction and dropping the Bulb straight down. Page 8 For technical questions, please call 1-888-866-5797. 60723... - Page 9 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. 60723 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Parts List
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175332509 when ordering parts. Page 10 For technical questions, please call 1-888-866-5797. 60723... -
Page 11: Assembly Diagram
Assembly Diagram (Under Part 20) 60723 For technical questions, please call 1-888-866-5797. Page 11... - Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.