Auto Chapter; Disc; Disc Initialize - Zenith XBR411 Installation And Operating Manual

Before Operation (Continued)

Auto Chapter

During recording, chapter markers are added automati-
cally at fixed intervals. You can set this interval to 5 min-
utes or 10 minutes. To turn off automatic chapter mark-
ing, select "None".
Disc Record Mode
VCR Record Mode
Auto Chapter
Prev.

DISC

Disc Initialize

If you load a completely blank disc, the recorder will ini-
tialize the disc.
DVD-R: The recorder initialize the disc to Video mode.
The recording mode will always be Video mode.
DVD-RW: The Initialize menu will appear. Select "VR
Mode" or "Video Mode" then press ENTER ( ).
Also, you can format the disc from the Setup menu as
below (DVD-RW disc only).
Disc Initialize
Disc Finalize
Disc Label
Disc Protect
AutoPlay
Prev.
Press SETUP.
1 1
The Setup menu appears.
Use v / V to select the DISC option.
2 2
While the DISC option is selected, press B to
3 3
move to the second level.
Use v / V to select the "Disc Initialize" option.
4 4
Press B to move to the third level.
5 5
"Start" icon is highlighted.
Press ENTER ( ).
6 6
Disc Initialize menu appears.
24
7 7
None
5 Min
10 Min
If you want to change the disc format, everything
recorded on the disc will be erased.
Select Close
Start
Select Close
Use b / B to select a desired Disc Initialize
Mode (VR Mode or Video Mode) then press
ENTER ( ).
Disc Initialize
Select a mode.
Video Mode
VR Mode
Caution