Zenith 206-3923 Operating Manual page 20

Setting the V-Chip
To use the TV after the TV is protected.
When a program is received that is blocked
by the V-Chip, enter the password, then press
MENU/ENTER. When the password is entered
correctly the protection will be temporarily
overridden.
If the TV is turned off, or the channel is changed
the V-Chip restriction will be reactivated.
NOTES:
• The V-Chip function is activated only on
programs and input sources that include a
rating signal.
• The V-CHIP SET (DTV) will only be selectable
when the unit receives a digital broadcast using
the new rating system. It may take several
minutes for the initial V-Chip Set-up to complete.
At this time some stations are still developing
this signal, in those cases the V-CHIP SET
(DTV) will not function.
20
To set the V-CHIP
1
Press MENU/ENTER. The menu screen appears.
2
Press or to select
menu.
3
Press or to select "V-CHIP".
4
Press to display the password
entering mode. Use number buttons
(0-9) to enter your password, then
press MENU/ENTER. The V-CHIP
menu appears.
5
Press or to select "V-CHIP SET",
then press . The V-CHIP SET menu
appears.
6
Press or to select "TV RATING",
then press or
rating.
OFF : TV RATING is not set
TV-Y : All children
TV-Y7 : 7 years old and above
TV-G : General audience
TV-PG : Parental guidance
TV-14 : 14 years old and above
TV-MA : 17 years old and above
• When you select TV-Y7, TV-PG,
TV-14, or TV-MA, press –/DISPLAY
to further defi ne the rating.
Press or to select the desired rating you want.
Press or to select the setting "ON" or "OFF".
7
Press or to select "MOVIE
RATING", then press
The RATING SET menu appears.
8
Press or to select the rating,
then press or
"OFF" for each rating.
G : All ages
PG : Parental guidance
PG-13 : Parental guidance less than 13 years old
R : Under 17 years old parental guidance suggested
NC-17 : 17 years old and above
X : Adult only
9
Press MENU/ENTER twice to return to the V-CHIP menu,
then press or
10
Press or to select "ON". Your settings are now set into memory.
11
Press MENU/ENTER repeatedly until the menu screen is cleared.
Otherwise, press EXIT to return to the normal screen immediately.
(OPTION)
to display the desired
.
to select "ON" or
to select "V-CHIP".
(continued)