Specifications - Sony UP-D898DC Instructions For Use Manual

Notes
• After the surface of the platen roller wiped has
been dried completely, turn the platen roller to
clean another portion.
• Do not turn the platen roller with hands. Use the
FEED button to turn it. To clean another part of
the surface of the platen roller, press the FEED
button again.
• Paper cutters are mounted in the unit.
Be careful not to touch the paper cutter. Touching
the paper cutter may cause injury.
4
Press the FEED button.
The platen roller turns about 120 degrees.
Be careful not to get your fingers caught in the
turning platen roller.
Notes
• Be careful not to get your fingers caught in the
turning platen roller.
• Be sure to start cleaning only after the platen
roller has stopped completely.
5
Repeat steps 3 and 4 until the platen roller becomes
clean.
6
After the platen roller has been dried completely,
close the door by pushing it.

Specifications

Power Requirements
12 V to 24 V DC
Input Current 8.2 A to 3.7 A
Operating Temperature
5 °C to 40 °C (41 °F to 104 °F)
Operating Humidity
20% to 80% (no condensation allowed)
Operating Pressure
700 hPa to 1,060 hPa
Storage and Transport Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and Transport Humidity
20% to 80% (no condensation allowed)
Storage and Transport Pressure
700 hPa to 1,060 hPa
154 × 88 × 165 mm (w/h/d)
Dimensions
(6 1/8 × 3 1/2 × 6 1/2 inches)
Mass 1.8 kg (3 lb 15 oz) (printer only)
Thermal head Thin-film thermal head, 1280 dots
Gradation 256-level gradation (8-bit)
320 × 100 mm (max.)
Picture size
Printing speed About 1.9 sec./image (960 ×
1280 dots) (printing at the high
speed)
About 3.3 sec./image (960 ×
1280 dots) (printing at the normal
speed)
Picture elements
4096 × 1280 dots (max.)
Dot density H: 100 mm/1280 dots = 0.078
V: 100 mm/1280 dots = 0.078
Square dots
Interface Hi-Speed USB (USB 2.0)
Accessories provided
Thermal head cleaning sheet (1)
CD-ROM (including multi-lingual
Instructions for Use, Readme and
printer driver) (1)
Before Using this Printer (1)
Service Contact List (1)
European Representative (1)
Optional accessories
Thermal Print Media
UPP-110HD (High Density)
UPP-110HG (High Glossy)
UPP-110S (High Quality)
28