Page 2
After a short delay the status LED is activated (on) and the detector transmits a test alarm signal to the control The TX-6212-03-1 is a LearnMode wireless smoke detector panel. designed for use in a security system with a compatible control Check that the signal is received by the control panel and panel.
Page 3
Maintenance Operation Description Remote monitoring Press the button for fifteen seconds to send a fire Replacing the batteries station alarm test alarm signal to the remote monitoring station. The detector is powered by two 3V lithium CR123A batteries. Important: To avoid a fire department dispatch, contact the remote monitoring station or put the When batteries are low, the detector status LED is off and an control panel into the corresponding test mode...
Page 4
Environmental Operating temperature 4 to 38°C (40 to 100°F) Storage temperature −34 to +60°C (−30 to 140°F) Relative humidity 10 to 90% noncondensing Dimensions (W x H) Detector 14.2 x 6.1 cm (5.6 x 2.4 in.) Mounting base 13.7 x 1.17 cm (5.4 x 0.46 in.) Regulatory information Certification CPD certificate...