Horizon Fitness HYDROFILL User Manual

HYDROFILL
USER GUIDE
WARNING
• Do not tamper with, disassemble or puncture the HYDROFILL.
• Keep HYDROFILL away from fire, open flame, or heat source.
• Keep HYDROSTIK cartridge away from fire, open flame, or heat source.
• Keep HYDROFILL away from children.
• Keep HYDROFILL in upright position.
• Fill the water slowly and carefully to avoid overfilling the water tank.
• Keep HYDROFILL in a ventilated location during operation.
• Remove HYDROSTIK cartridge immediately after charging
• Do not consume recovery powder and keep it away from children.
• Keep all electrical connections dry at all times
SYSTEM OVERVIEW
The HYDROFILL system is designed to refill
Horizon's HYDROSTIK solid hydrogen
cartridges automatically, using a proton
exchange membrane (PEM) electrolyzer based
system. The HYDROFILL separates hydrogen
and oxygen from water and stores hydrogen in
a safe, solid form using special metal alloys
contained in the HYDROSTIK cartridges.
ITEMS LIST
a. HYDROFILL unit
b. AC-DC adapter
c. System recovery pouch
d. Cartridge cover
SYSTEM FEATURES:
Quiet, safe and convenient hydrogen supply
Designed to refill HYDROSTIK cartridges
Automatic cartridge refilling system
High hydrogen purity 99.9%
Optional solar power supply
Water tank cover
Waste water tank
Water tank
HYDROSTIK
cartridge port
Status indicator
HYDROFILL unit(a)
Cartridge
System recovery pouch(c)
AC-DC adapter (b)
SPECIFICATIONS
Stack type
Dimensions (W x D x H)
Weight
Input voltage
Rated power
Water input
Water temperature
Water consumption
Hydrogen output pressure
Hydrogen generation capacity
Purity
Outlet specification
Refilling time for one HYDROSTIK
The Specification is subject to change without notice.
Status indicator lights
Green
on
on 1 second, off 1 second
green 1 second, red 1 second
One year limited warranty.
OPERATION INSTRUCTIONS
1. Open the water tank cover located at the top of the HYDROFILL unit. Carefully fill de-ionized or distilled
water into the water tank until water reaches the ridge level in the tank as shown below in Fig. B. Close
the cover.
Fig. A
Connect the AC-DC adapter to the unit and an AC power supply (Fig. C).
2.
Once connected, a green LED light on the front of the unit should start to flash (Fig. D).
cover(d)
AC-DC adapter
1
Proton exchange membrane electrolysis cell
145x153x208mm (5.7x6x8.2in)
1.8Kg ±5% (3.97Lbs±5%)
DC: 2.5-3.3V
23W(max.）
De-ionized or distilled water
20-65°C (68-149°F)
Approx. 20ml/hr (1.2in /hr)
3
3.0MPaG (435.11PSI)
0-3L/hr (0-183in /hr)
3
99.9% (designed for HYDROSTIK )
Designed for HYDROSTIK
Max. 6 hours (Depends on ambient temperature.)
Red System Status
HYDROSTIK cartridge is full
Waiting to fill HYDROSTIK cartridge
HYDROSTIK cartridge is being filled
on
on 1 second, off 3 seconds Add apple acid
on 1 second, off 1 second Add water or empty waste water tank
Contact customer service
Fig. B
Fig. C
The LED flashes green
Water level
Fig. D
2