Samsung RB3 T Series User Manual page 31

STEP 2 Spacing (applicable models only)
STEP 3 Flooring
STEP 4 Adjust the levelling legs
CAUTION
• The refrigerator must be levelled on a flat, solid floor. Failing to do so can cause damage
to the refrigerator or physical injury.
• Levelling must be performed with an empty refrigerator. Make sure no food items
remain inside the refrigerator.
• For safety reasons, adjust the front side a little higher than the rear side.
The refrigerator can be levelled using the front legs that have a special screw (leveller) for
levelling purposes. Use a flat-head screwdriver for levelling.
Untitled-6 31
1. Open the door and locate the provided
spacer (Gray block).
2. Unpack the spacer and attach it to the
rear of the refrigerator as shown. They
help ventilate air to the rear wall and
save power consumption.
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each foot of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpet along the movement path.
English 31
2020-08-07 PM 12:24:38