Table of Contents
Advertisement
ECO
Tec
®
G
-
as
fired water boiler
The ECO Tec control display
Figure 6
ECO Tec boiler control display states
Screens shown are typical only. Actual
screens depend on control settings chosen.
Swipe:
Slide finger left or right on the screen to navigate forward and backward on applicable screens.
Press:
Touch icons on screen to perform specified action.
Scroll:
Place finger on slide bar empty space and hold to scroll. Applicable screens can also be swiped up or down to scroll.
Double tap:
Applicable on editable parameters. Allows user to enter edit mode by double tapping parameter.
Figure 7
ECO Tec boiler control display states
10
– 80/110/150/199 U
Navigation controls
Status: Shows the current sequence of operation status with the active priority.
0-10v: Shows the current 0-10v input value from external device.
1-4: Shows inputs 1 through 4, what they are assigned to, their custom
names and their status.
Pumps/Aux: Shows which aux/pump outputs are currently active.
Additional
Shows whether AHD is off or on. Only appears if a priority is selected
Heat Demand:
to use AHD.
Outdoor Temp: Shows the current outdoor temperature sensor value. Only visible if
selected to use.
DHW Out/Flow: Shows current temperature and current flow rate of the Combi DHW
in GPM. Only visible for Combi models.
Supply/Return: Shows the current System Supply and System Return temperature.
Only visible if selected to use.
Boiler Out/In: Shows the current Boiler Out and Boiler In temperatures.
Target Temp: Shows the current Target Temperature of the active priority.
Modulation Rate: Shows the modulation rate of the boiler's blower motor.
'
i
m
ser
s
nformation
Part number 550-100-261/0520
anUal
Advertisement
Table of Contents
