Brother DCP-T520W Online User's Manual page 47

2
1
8. Change the paper size and paper type settings for the MP tray, if needed.
Make sure printing has finished before you close the MP tray.
NOTE
An MP tray cover is supplied with your machine in some countries. The cover is designed to prevent dust
from entering the machine through the slot when you are using the MP tray. Follow these steps to install the
cover to the MP tray.
1. Open the MP tray.
2. Using both hands, fit the two pins on the cover (1) into the holders in the front of the MP tray (2).
1
2
3. Pull the top of the MP tray cover slightly toward the front of the machine, and load paper in the MP tray
with the printing surface face up.
4. Push the top of the MP tray cover until it is leaning against the MP tray.
41