Cobra MicroTalk PMR300 How To Use Manual page 12

PMR300-UK.qx copy 6/21/99 11:45 AM
Advanced Features
Programming Programming Memory Locations
Memory
Your MicroTalk has 10 memory (0-9) locations for
Locations
storing your most frequently used channels.
Rotate ON - OFF Volume Control
1
An audible "tone" will indicate that the unit is
on.The LCD will go through a 3-second self-
test and then go to operational mode.
Push and release
2
a memory location flashes.
Select memory location you wish to change by
3
pushing and releasing either
(Use MEM 6 for this example).
22
Page 22
clockwise.
button until icon and
button.
Advanced Features
Push and release button again.
4
MAIN CHANNEL will flash and only the
icon will remain flashing.
Select desired main channel you wish to store
5
(1-8) by pushing and releasing either
button.(Use CHANNEL 8 for this
example.)
Note
Once you enter memory
mode you can talk and lis-
ten to any channel you
select after programming is
complete. See Using
Memory Locations section
on page 26.
continued
23