Calibration - Siemens SICAM T 7KG966 Product Information

12

Calibration

WARNING
Warning - accidents can occur by using inappropriate
tools
Non-observance may lead to death or serious
injury.
When carrying out work, it is essential that you observe
the regulations and instruction guidelines of accident
prevention regulation BGV A3. Use appropriate power
tools.
The device comes calibrated from the factory, and it
does not have to be calibrated again throughout its
entire operation period. The calibration is only carried
out if necessary due to internal requirements.
For a detailed description of the device calibration, see
the device manual of SICAM T 7KG966, order number
E50417-H1040-C493.
SICAM T 7KG966, Product Information
E50417-B1050-C493-A4, Edition 12.2012
29