Cable Routing
Cable must be routed with an adequate slack loop to prevent cable damage. Route cable to point 1 secure to tie down with a T
route cable across the bottom of the enclosure to point 2 secure to tie down with a T
the cables with a Tac-Ty at point 3 or 4.
Point 1
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTRUCTIONS CM315
Point 4
Point 2
-T
AC
Y
Point 3
Page 3 of 4
. Route to the desired patch panel after securing
-T
. Next
AC
Y
Cables Extend
to Patch Panel