Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Assembly Diagram on page 7.
Assembly
Note: Only finger tighten bolts until
Carrier is fully assembled.
1.
Align the mounting holes on the ends
of the Frames (2) with the mounting
holes along the sides of the Post (1).
2.
Fasten the Frames to the
Post using the M10 Bolts (10),
Washers (11), and Lock Nuts (12).
Functions
Carrier
Page 4
Figure A: Components
For technical questions, please call 1-888-866-5797.
3.
Set the Cross Braces (6) over
the Frames (2) and fasten the
Cross Braces to the Frames using
the two M8 Bolts (7), Washers (8),
and Lock Nuts (9) each.
4.
Use a wrench (not included) to
tighten all bolts securely.
Post
Hitch Pin
R-Pin
Item 66983