Connecting Via The Dc Output Adapter Cable - Roland S-240P Owner's Manual

Connecting/Disconnecting the S-240P

Connecting Via the DC OUTPUT Adapter Cable

For devices such as the M-5000 and M-5000C that have an XLR-type EXT. POWER DC INPUT connector, you make the connection to the DC OUTPUT
plug on the S-240P via the included DC OUTPUT conversion cable.
Attaching
1
Insert the DC OUTPUT plug on the S-240P into the
Speakon end of the conversion cable.
2
Rotate the S-240P's DC OUTPUT plug clockwise until a
distinct click is heard.
3
Insert the XLR4 end of the conversion cable into the
device's EXT. POWER DC INPUT connector until it connects
with an audible click.
10
Detaching
1
While keeping the lock switch on the XLR4 end of
conversion cable connected to the S-240P depressed,
detach the cable from the EXT. POWER DC INPUT connector.
Lock switch
2
While holding the lock switch on theS-240P's DC OUTPUT
plug pulled back, rotate counterclockwise.
3
Detach the DC OUTPUT plug on the S-240P from the
Speakon end of conversion cable.
Lock switch