Output Position
Using this menu, the VFC-2100DE will allow the user to fine-tune the position of the output display.
Pressing the ON/+ or OFF/- keys while the H-POSITION field is bracketed will adjust the display
horizontally left or right across the screen. Using the same procedure while the V-POSITION field is
bracketed will adjust the display vertically up or down on the screen. If the RESET field is selected and
the ON/+ key is pressed, the image will return to the position before any adjustments were made.
Sync Type
The Output Sync Type can be selected when this field is bracketed. The different types of Sync are:
GR =
Sync is on Video
-C =
Negative Composite
H, V = Separate Horizontal Sync
Vertical Sync Positive or Negative
3LED = Tri-level Sync-On-Green Video
Output Levels/Gamma Menu
The OUTPUT LVLS Menu shown above allows the user to fine-tune the output video levels as well as adjust color
balance and gamma. These adjustments should only be made if required and can cause some artifacts if made
improperly. Contrast and brightness adjustments are common.
Color Space
Manual # 26-6092936-00 / Revision A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
OUTPUT POSITION
H-POSITION
V-POSITION
RESET
OUTPUT VID LVLS
CONTRAST
BRIGHTNESS
COLOR SPACE
COLOR BALANCE
GAMMA MENU
<>
<>
<+>
###.#%
###.#%
<AAAA>
<+>
<+>
VFC-2100DE – Scaler with Digital Effects
21