Technical Data; Inspection Check List - IKEA TVATTAD Manual

ENGLISH

Technical data

Product type
Dimensions
Water supply pressure
1) If the pressure in your area is lower or higher, please contact your Authorised Service Centre.
Information on the electrical connection, voltage and overall power is given on the
rating plate, on the inner edge of the appliance door.
Electrical connection
At the end of installation you can connect
the mains plug to the mains socket.
The rating plate and the 'Technical Data'
chapter indicate the necessary electrical
ratings. Make sure that they are compatible
with the mains power supply.
Check that your domestic electrical
installation can take the maximum load
required, also taking into account any other
appliances in use.
Connect the appliance to an earthed
socket.

Inspection check list

Warning! Refer to Safety
chapters.
Built in - Washing Machine
Width (cm)
Height (cm)
Total depth (cm)
Minimum
1)
Maximum
59.6
81.9
55.3
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
The power supply cable must be easily
accessible after installing the appliance.
For any electrical work required to install this
appliance, contact our Authorised Service
Centre.
The manufacturer does not accept any
responsibility for damage or injury through
failure to comply with the above safety
precaution.
Please follow the inspection check list before
using your appliance.
9