Table of Contents
Advertisement
Optional Barrier Glass Stoppers Installation / Removal
There are 4 optional stoppers (2 side/2 front) included in the manual pack
which provide additional support to the glass barrier, if desired--install the
stoppers prior to installation of the barrier glass.
1. Install glass stopper (if desired) by sliding down the outside of the outer
side panel.
2. Slide backwall outer panel behind glass stopper bracket (if installed).
3. Install glass stopper (if desired) by sliding stopper assembly between
unit and panel - the stopper assembly will attach to the unit via a magnet,
adjust position of glass stopper is required.
4. Repeat steps 1-6 to install outer panels on opposite side.
5. Install barrier glass as per instructions in this manual.
installation
City Series CB60E | 73
Advertisement
Table of Contents
