Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Neets Control SieRRa DK
-
Page 2: Foreword
Foreword: The purpose of this document is to describe how to install and configure the Neets Control – SieRRa DK and EU models. COPYRIGHT - All information contained in this manual is the intellectual property of and copyrighted material of Neets. All rights are reserved. You may not allow any third party access to content, information or data in this manual without Neets’... -
Page 3: Table Of Contents
Table of content Foreword ............................... 1 Revision list ............................1 Table of content ............................. 2 Description ............................3 Connections on units ..........................4 Technical description ..........................5 USB ............................. 5 RS-232 Port ..........................5 IR/RS-232 ports .......................... 6 uSD-Card ............................ 6 I/O Ports ............................. -
Page 4: Description
Description: Neets Control – SieRRa is the best of both worlds (touch screen interface combined with hardware buttons). An extra dimension is added by a built-in web server, which means you can use a secondary touch panel to get more functions. -
Page 5: Connections On Units
Description Neets Control - SieRRa RS-232 (Rx/Tx) RS-232 (Tx) / IR (controls up to 4 devices) LAN device control Expansion bus (for level knot, real-time clock, extra buttons…) Micro SD card Real time clock Add on board Buttons LED colors (Green, Red, Blue, Orange, Turquoise, Purple, White) -
Page 6: Technical Description
Max current: 0,5 A Power 12VDC (110-230VAC Adapter included) The USB port can only be used to program the Neets Control – SieRRa from the Neets Project designer software. It cannot be used to control any devices what so ever. -
Page 7: Ir/Rs-232 Ports
IR/RS-232 ports The SieRRa has 2 ports (TX-2 and TX-3) that can be configured (in software) either as RS-232 or as IR emitter. Junction When used as dual IR port: When used as RS-232 transmit port: When used as single IR port: Connect the device to e.g. -
Page 8: I/O Ports
I/O Ports The Neets Control – SieRRa has 3 I/O’s onboard. They can be used for external keyboard, PIR (movement) sensor, keyboard lock, extra relays and so on. The ports are not potential free, which means you will need external relays, if you need to prevent e.g. -
Page 9: Fault Finding
Fault finding When errors occur the LED will indicate this. The following will give you a guide to find these errors. In the Neets Control – SieRRa the LED´s are placed here: Fault Solution uSD-card missing Control that the uSD-card is mounted correctly and that the uSD-card you are using are formatted with FAT. -
Page 10: System Log File
This method are only intended to be used, if the control system lock up and enters “Unexpected Error”. System log file The Neets Control – SieRRa has a log file, which contains information, warnings and errors that the system encounters during run. The log file looks like below: To give you the best support possible we recommend that you have access to the log file, when contacting support.