Table of Contents
Advertisement
Installation (cont'd)
Placement
Important: See lifting instructions to properly lift
case when being placed on dollies or permanent
location. (See page 8 for Lifting Instructions.)
First remove Blocks and L Brackets around the
case from pallet.
Proceed by setting forklifts under specified loca-
tions as instructed in the Lifting Instructions
(pg. 8.) Be careful not to damage drains or near
components when placing forks underneath
case. A spotter is mandatory to ensure no dam-
age is caused to the case. Lift case and replace
with dollies, place near or in permanent location.
Insert Forks
Underneath
Deck
Move the fixture as close as possible to its per-
manent location and then remove all packaging
and preparing to remove off Skid. Remove all
separately packed accessories such as kits, and
Remove Block
and L bracket
panels. Check for damage before discarding
packaging.
In the case a fork lift truck is not available follow
the demonstration below to properly lift case us-
ing a Johnson Bar (J-Bar) to place on dollies to
traffic from start point to placement area.
Place J-Bar underneath base of merchandiser
to gain leverage, once lifted place Dollie under-
neath first end and slowly lower onto dollie en-
suring merchandiser is placed on stable location.
Proceed to opposite end and repeat.
7
Advertisement
Table of Contents
