The Method Of Power-On (For Service) - Pioneer SD-533HD5 Service Manual

7.1.4 The method of power-on (for service)

SHORT Assy
The connector of POWER SW Assy
The connector of FRONT INPUT Assy
and FRONT LED Assys
Factory Key
SD-533HD5, SD-643HD5
When removes the Front Grille, remove the
connectors from POWER SW Assy, FRONT INPUT
Assy and FRONT LED Assy and remove the Grille.
This set is not turned on the power in the state that
removed the connectors.
At this time, connect a connector that connected to
the POWER SW Assy to the SHORT Assy, and can
turn the MAIN POWER SW to ON.
Be careful there is a case to be turned on the power
in the state that front side of this set opens.
In addition, the front input and front key do not work
because each Assy does not connect it, but the
remote control unit works in the same way normally.
There is a Factory Key on the FRONT LED Assy.
When enter the Factory mode, transfer a code with
the remote control unit or connect the FRONT LED
Assy. (Turn the Main Power SW to OFF when
connects it.)
149