Before The First Use - Zanussi ZBF 361 Instruction Booklet

The Safety Thermostat
This oven is provided with a safety thermostat. In case
of malfunctioning of the main thermostat, and
consequent over-heating, the safety device will stop the
power supply to the appliance. If this happens, call your
local Service Force Centre. Under no circumstances
should you attempt to repair the appliance yourself.
The cooling fan
The cooling fan operates during cooking. Air is expelled
through vents between the oven door and the control
panel, as shown in the diagram.
The cooling fan may run on after the oven is switched
off to keep the controls cool. This is quite normal.

Before the First Use

Remove all packaging, both inside and outside
the oven, before using the oven.
Before first use, the oven should be heated without food.
During this time, an unpleasant odour may be emitted.
This is quite normal.
The oven will work only if the time of day has
been set.
1. Set the time of day with the electronic programmer
(see chapter "Electronic Programmer").
2. Switch the oven function control knob to fan
cooking .
3. Set the thermostat control knob to MAX.
4. Open a window for ventilation.
5. Allow the oven to run empty for approximately 45
minutes.
This procedure should be repeated with the grill
function for approximately 5-10 minutes.
6
FO 2259
Fig. 4