Table of Contents
Advertisement
Quick Links
202i
Stand-mount/Bookshelf loudspeaker system
Product Summary
The 200 series was deemed as the rarity in the mass consumer hi-fi market – a reasonably
priced loudspeaker that provided high sensitivity, extended linear frequency response and
pinpoint stereo imaging.
The 202i loudspeaker system is a fourth-order vented loudspeaker system. The speaker
3
comprises of a
/
-in high frequency with a polyamide dome and one 7in low frequency
4
polypropylene cone.
The B&W wall bracket accessory permits easy, multi-directional positioning on walls.
Technical highlights
The Design incorporates a cabinet profile and wedge shaped grilles on acoustically
transparent frames.
The magnetic fluid-cooled voice coils are a B&W hallmark, wound on glass reinforced
Kapton® formers, enabling the drivers to take the heat when reproducing modern digital
recordings.
In common with B&W tweeters, the lightweight units incorporate low viscosity magnetic fluids
to offer excellent power handling and linearity.
Drive Units
1 x 19mm high-frequency with polyester
dome
1 x 180mm low frequency with
composite short fibre cone
Frequency Response
48Hz – 20kHz ± 3dB on reference axis
Sensitivity
90dB spl(2.83V 1m)
Nominal Impedance
4 ohms
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
Power Handling
Suitable for amplifiers up to 120W
Continuous
Dimensions
Height: 497mm Width: 225mm
Depth: 222mm
Finish
Black ash vinyl
www.bwspeakers.com
Advertisement
Table of Contents
Need help?
Do you have a question about the 202i and is the answer not in the manual?
Questions and answers