Remote Control Buttons - Vizio M260VP User Manual

VIZIO M260VP User Manual

Remote Control Buttons

POWER ( )—Press to turn the TV on from the Standby mode. Press
it again to return to the Standby mode.
CEC-Supported Buttons:
CEC needs to be set up and enabled for these buttons to work. See
CEC section on page 40 for more information.
● (Record)—Press to begin recording on your CEC-supported
device.
(Pause)—Press to pause playback on your CEC-supported
device.
► (Play)—Press to start Playback on your CEC-supported
device.
■ (Stop)—Press to stop playback/recording on your CEC-
supported device.
(Previous)—Press to skip the previous track on your CEC-
supported device.
(Reverse)—Press to reverses playback on your CEC-
supported device.
(Fast Forward)—Press to fast forward playback on your CEC-
supported device.
(Next)—Press to skip to the next chapter on your CEC-
supported device.
EXIT—Press to exit from open menus.
MENU—Press to open the On-Screen Display (OSD) menu.
OK—Press this button to display the Channel List. Press to confirm
selections for On-Screen Display (OSD) menus.
▲▼◄ ►—Press to navigate the OSD menu. They will also be used as
value settings when the slide bar is shown on the screen and option
settings to turn a feature off or on.
BACK—Press to return to a previous OSD menu. Press repeatedly to
close the OSD.
GUIDE—Press to display detailed program information when viewing a
digital TV program.
Color Buttons (Yellow, Blue, Red, & Green):

Yellow—This button performs the same function as the "A" button on your Cable or Satellite box
when using the remote to control your pre-programmed Cable/Satellite Box DVR.

Blue—This button performs the same function as the "B" button on your Cable or Satellite box
when using the remote to control your pre-programmed Cable/Satellite Box DVR.

Red—This button performs the same function as the "C" button on your Cable or Satellite box
when using the remote to control your pre-programmed Cable/Satellite Box DVR.

Green—This button performs the same function as the "D" button on your Cable or Satellite box
when using the remote to control your pre-programmed Cable/Satellite Box DVR.
VOL +/- —Press to turn the volume up or down.
MEDIA – Use this button to access the USB drive to view your pictures.
MUTE—Press to turn the sound on and off.
LAST— Press to recall the previously viewed channel.
CH +/- —Press to change the channels up or down
HDMI—Press to select the HDMI input. Press repeatedly to cycle between both HDMI inputs.
16
www.VIZIO.com