The Control Panel - Zanussi Electrolux ZSF 6128 Instruction Book

The control panel

Programme guide
Programme selector dial and On/Off indicator
light:
the selection of a washing programme occurs by
turning the programme selector dial clockwise or anticlockwise,
until the desired washing programme (see "Washing
programmes" chart) corresponds with the programme selection
marker placed on the dial (position On). The On/Off indicator
light illuminates.
The indicator lights of the phases foreseen for the selected
programme start flashing.
To switch off the machine turn the programme selector dial
until the marker on the dial corresponds with the On/Off
indicator light (position Off). The On/Off indicator light turns off.
With the programme selector dial it is also possible to set the
level of the water softener (see specific paragraph).
"Delay Start" button:
programme to be delayed by 3 hours; the corresponding
indicator light illuminates.
"Start/Cancel" button:
been set, press this button to start the programme.
The Start/Cancel indicator light (placed above the button)
illuminates.
With this button it is possible to cancel a washing programme
in progress.
this option allows the start of the
once a washing programme has
On/Off indicator light
Programme selection marker
Door handle
Programme selector dial
Indicator lights:
Wash
Dry
End
As soon as you select a washing programme, the phase
indicator lights for that programme will start flashing.
As the programme starts, the phase indicator lights turn off
except for the indicator light of the phase in progress which will
remain lit with a static light.
Salt refilling indicator light: illuminates when the
salt has run out.
Rinse-Aid refilling indicator light: illuminates when the
rinse aid has run out.
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.
5
Start/Cancel indicator light
Indicator lights
Delay Start button
Start/Cancel button
have the following meanings:
illuminates when the washing and rinsing
phases are running.
illuminates when the drying phase is
running.
illuminates when the washing programme
has ended.
It also has added functions of visual
signalling as:
- the setting of the water softener,
- intervention of an alarm due to the
malfunction of the machine.