The Control Panel; Audible Signals - Zanussi ZDT 6255 Instruction Book

The control panel

On/Off button
Function push buttons:
programme selected, the following functions can also be set
with the help of these buttons:
- water softener setting,
- deactivation/activation of the rinse aid dispenser,
- the cancelling of a washing programme in progress,
- deactivation/activation of the audible signals.
Programme selection buttons:
the desired washing programme (see "Washing programmes"
chart).
Delay start button:
this option allows the start of the
programme to be delayed by 3, 6 or 9 hours.
Indicator lights:
have the following meanings:
SALT salt refilling indicator light, illuminates
when the salt has run out
RINSE AID rinse aid refilling indicator light, illuminates
when the rinse aid has run out
END OF CYCLE illuminates when the washing
programme has ended, it also has added
functions of visual signalling as:
- something not working with the machine,
- deactivation/activation of the audible
signals,
- the setting of the water softener.
in addition to the dishwashing
allows the selection of
Function buttons
Programme selection
buttons
Delay start button

Audible signals

Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- setting of the water softener
- end of programme
- something not working with the machine
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1. Press the On/Off button. All programme selection buttons
indicator lights will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated, this means that a washing programme has
been selected.
The programme must be cancelled: press simultaneously
the function buttons 2 and 3 for about 2 seconds, the
indicator light of the set programme button starts flashing
for about 2 seconds.
After about 2 seconds the indicator lights of all the
programme selection buttons will illuminate indicating that
the set programme has been cancelled and that the
machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press the function button 3, the indicator lights of function
buttons 1 and 2 turn off while the indicator light of the
function button 3 goes on flashing, at the same time the
END OF CYCLE indicator light illuminates indicating that
the audible signals are active.
4. To deactivate the audible signals, press again the function
button 3, the END OF CYCLE indicator light turns off,
indicating that the audible signals have been deactivated.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
To activate again the audible signals simply follow the above
operations until the END OF CYCLE indicator light illuminates.
5
Indicator lights