Zanussi DA 6142 Instruction Book page 13

Filling with rinse aid
(Rinse aid dispenser type B)
1. Open the container by turning the lid (A) anticlockwise.
2. Fill with rinse aid exactly up to the level indicator marked
"max".
BR01
Ensure the lid is closed after every refill.
Adjusting the dose
According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (C)
(position 1 minimum dosage, position 6 maximum dosage).
Increase the dose if there are drops of water or lime spots on
the dishes after washing.
The dose is factory set in position 5.
Reduce it if there are sticky
whitish streaks on the
dishes.
BR13
BR02
Top up with rinse aid when:
1. The indicator (B) becomes clear,
2. Only for dishwasher models with rinse aid indicator
light:
When the rinse aid indicator light on the control panel
illuminates (when the machine is switched on).
Clean up any rinse aid spilt during filling with an absorbent
cloth to avoid excess foaming during the next wash.
Only use branded rinse aid for dishwashers. Never fill the rinse
aid dispenser with any other substances (e.g. dishwasher
cleaning agent, liquid detergent). This would damage the
appliance.
5
BR03
BR11