Advertisement
Power wash zone with 150 litre wash tank
�
with 2,2kW wash pump supplying upper was
arms, 1,1kW wash pump supplying lower
was arms. Maximum water contact wash
arms for best possible washing result.
Separate wash and rinse zones so
�
detergent does not mix with the rinse aid and
is always active.
Rinse area equipped with the DUO-rinse
�
system where the first ramp is filled by the
re-used final rinse water, to eliminate any
trace of detergent, and the second ramp is
filled by hot fresh water to guarantee
sanitation of the items.
Atmospheric boiler combined with the
�
rinse booster pump for perfect rinsing
performances in terms of sanitation, energy
saving, independence from the water
pressure on the network. Incorporates
non-return (air gap class A) valve.
As optional extra the RTM200 can be
�
equipped with a drying zone for fast and
efficient drying.
The pre-wash, wash and rinse tanks are
�
pressed with completely rounded corners
and sloping base to facilitate cleaning.
RTM200 has smooth surfaces. 304 AISI
�
stainless steel front and side panels,
strainers and wash and rinse arms.
OPTIONAL ACCESSORIES
ACCESSORIES
12 S/S PLUGS FOR
WASH.ARMS-MODUL/COMP.RT
BASKET FOR 5 HALF INSULATED TRAYS-RED
DRAIN KIT FOR MODULAR+COMPACT RACK
TYPE
EL. DRY. TUNNEL-CORNER-RIGHT-MODULAR
RT
EL. DRYING TUNNEL-CORNER-LEFT-MODULAR
RT
EL. DRYING TUNNEL-EL.MODULAR RT-L>R-600
EL. DRYING TUNNEL-EL.MODULAR RT-L>R-900
EL. DRYING TUNNEL-EL.MODULAR RT-R>L-600
EL. DRYING TUNNEL-EL.MODULAR RT-R>L-900
KIT 6 BASKETS FOR 1-TANK RACK TYPE DW
KIT 9 BASKETS FOR 1-TANK RACK TYPE DW
KIT SANITIZ(1 HEAT.EL)-MOD.RT 180/200R/H
KIT SILASTIC CURTAINS FOR RACK TYPE DW
EBCD10
2010-05-28
Wash arms and double tank filter (flat and
�
deep box) easy to remove.
Height adjustable stainless steel feet.
�
All models finished in top quality materials
�
with double skinned construction to aid
durability and reduce noise.
Self-draining wash pumps provide
�
maximum hygiene.
Hinged flap for easy access to the energy
�
saving condenser unit.
Large balanced inspection doors for easy
�
access to wash area.
Self-cleaning cycle in pre-wash, wash and
�
rinse zones.
Automatic start/stop function.
�
Advanced electric control panel with
�
sound signals and visual display.
Counter balanced door with safety switch
�
and easy to grip handle.
Built-in rinse water heater to increase the
�
temperature of the final rinse water.
Electronic control panel with
�
autodiagnostic check control.
RTM200ERA
RTM200ELA
534272
864239
867005
864150
864512
864510
864500
867050
867051
864159
864245
The Company reserves the right to alter technical specifications without prior notice.
MODELS
RTM200ERB
RTM200ELB
534273
534274
534275
864239
864239
864239
867005
867005
867005
864150
864150
864150
864512
864513
864513
864511
864511
864501
864501
864510
864500
867050
867050
867050
867051
867051
867051
864159
864159
864159
864245
864245
864245
RACK TYPE DISHWASHERS
35mm thickness foam injection insulated
�
doors to reduce noise and reduce heat
dispersion.
Available with version equipped with
�
Energy Saving Device (ESD) to pre-heat the
incoming cold water and to save up to 12kW
of energy. ESD incorporates a condenser
unit to decrease temperature and humidity of
the outlet hot steam.
Separate pre-wash, wash and rinse tanks
�
for lower water and detergent consumption.
No overflow of the detergent from the wash
tank to the others and no need for fresh
water in order to cool down the water in
pre-wash tank.
98% recyclable by weight.
�
CFC free packaging.
�
Low noise level <70dBA.
�
Developed and produced in ISO 9001 and
�
ISO 14001 certified factory.
* For models without ESD, the installation is
recommended below a dishwashing hood to
convey steam.
ZANUSSI
P R O F E S S I O N A L
www.zanussiprofessional.com
MODULAR RTM 200
Advertisement
