Advertisement

PARIS MAX
36V
USER'S MANUAL
Important information included - please read before your first ride!

Advertisement

Table of Contents
loading

Summary of Contents for NCM PARIS MAX 36V

  • Page 1 PARIS MAX USER'S MANUAL Important information included - please read before your first ride!
  • Page 2: Table Of Contents

    PARIS MAX 36V INDEX 1. GENERAL INTRODUCTION 1.1 Welcome ................................01 1.2 Use of the Manual ................................ 01 1.3 Service and Technical Support ............................01 1.4 Choosing the correct size ............................01 1.5 Bicycle components ..........
  • Page 3: Welcome

    1.2 Use of the Manual We recommend that you read this manual thoroughly before taking your NCM electric bike for a ride. It is important not to overlook the safety instructions and explanations of traditional and non-traditional bicycle parts as this will give you a general understanding of your new NCM electric bicycle. This manual is designed to help you get the most out of your electric bike, so we have tried to answer as many of your possible questions as possible.
  • Page 4: Bicycle Components

    PARIS MAX 36V GENERALITIES On some bikes, such as low-entry touring bikes, the frame clearance measurement cannot be used as these do not have a top tube or are steeply downward. On these bikes the height of the seat tube will be used to select the correct size. You should be able to comfortably touch the ground while sitting on the saddle when it is at its lowest point on the saddle tube.
  • Page 5: Scope

    PARIS MAX 36V GENERALITIES Handlebar Accessories 1 Left brake lever 2 Left grip 4 Buzzer 7 Right brake lever 5 Revo 7-speed gearbox 6 Right grip 3 Display Frame number indicator 1 Frame number (main tube) 2 Frame number (sticker) 1.6 Scope...
  • Page 6: Security

    PARIS MAX 36V SECURITY 2. SECURITY 2.1 Battery and charger ● Keep the battery and charger away from water and heat sources. ● Do not connect the positive and negative terminals. ● Keep the battery away from children and pets.
  • Page 7 PARIS MAX 36V SECURITY It is common for countries with right-hand traffic to have the front brake on the left brake lever and the rear brake on the right lever. The opposite is generally possible in countries with left-hand traffic. The table below shows several examples.
  • Page 8: Transportation

    2.4 Keys Each NCM electric bike comes with two copies of the battery fixing key. Bicycles with ring locks come with additional keys (not the same key as the battery). On-board charging of the battery will likely lead to infrequent use of the battery fixing key; it is required for maintenance and repair, however, keep this in mind when storing the key.
  • Page 9: Installation And Adjustment

    PARIS MAX 36V INSTALLATION AND ADJUSTMENT 3. INSTALLATION AND ADJUSTMENT 3.1 Handlebar and seat post assembly Lift the handlebar and plastic cover into place, then press the lock lever to secure the stem. 3.2 Mounting the pedals - Identify your pedals: check the letters on the pedal, "L" or "R".
  • Page 10: To Display The Table

    PARIS MAX 36V INSTALLATION AND ADJUSTMENT 3.3 To display the table Align the two parts of the frame, pull the lever (2) down, and then close the small lock lever (2) down to lock the frame. Lever (2) needs additional force to fully close.
  • Page 11: Seat Position

    PARIS MAX 36V INSTALLATION AND ADJUSTMENT 3.4 Seat position To allow a comfortable, fatigue-free and safe ride, the height of the saddle and handlebar must be adjusted to the user's body size. The saddle height is correct if the leg is close to full extension while the foot is resting on the pedal in the lower position of the start cycle. The toes should still be able to touch the ground comfortably.
  • Page 12: Saddle Height

    PARIS MAX 36V INSTALLATION AND ADJUSTMENT 3.5 Saddle height The quick release lever should require considerable effort to bring it to the fully closed position to prevent any unwanted movement while driving. WARNING: A poorly closed quick-release lever may reopen or have limited ability to hold the saddle in place. This can cause the saddle to suddenly drop onto the seat tube, which can lead to falls and serious injury.
  • Page 13 PARIS MAX 36V INSTALLATION AND ADJUSTMENT WARNING: Overuse or improper use of the front wheel brake can cause the rear wheel to lift off the ground, resulting in decreased control of the bike or even the bike toppling over and the rider falling in the direction. of the movement; This can cause serious injury and damage to the bike. Be careful when applying the front brake, and avoid using it without also using the rear brake.
  • Page 14 PARIS MAX 36V INSTALLATION AND ADJUSTMENT 1.Alignment bolts 2.Cable-bolt clamp 3.adjuster-pads Rim brake (V-brake) Brake modulator Brakes have a brake modulator, or "power modulator." This device includes a small spring in the brake tube.As the brake lever is squeezed, you must compress the spring before you can apply full stopping power to the rim.
  • Page 15: Gear Shift And Gear Change Adjustment

    PARIS MAX 36V INSTALLATION AND ADJUSTMENT 3.8 Shift adjustment and speed change Internal rear derailleur adjustment (Nexus 8-speed) These systems change gears with a mechanism located on the rear hub. Check the internal gear system monthly. 1. Rotate the shift lever to fourth gear.
  • Page 16: General Overview Of The Electronic Parts

    Drums The lithium ion battery packs for NCM electric bikes are some of the highest capacity packs available on the market, with NCM Milano MAX storing up to 504Wh of energy. The packs consist of high-density Panasonic cells, which means our designs stay sleek and lightweight without sacrificing battery capacity.
  • Page 17: General Remarks

    ● Stop charging the battery immediately if you notice anything unusual, such as smoke or a strange smell, remove the battery and store it outside the house, then take the battery to an authorized NCM dealer or an experienced technician for repair or replacement.
  • Page 18: Use

    8. Press down on the top of the battery until you notice a "click" to ensure that the battery is properly secured. 9. Remove the key. 10. Your NCM electric bike is ready to ride. Charging the battery inside the bike 1.
  • Page 19: Storage

    PARIS MAX 36V OVERVIEW OF THE ELECTRONIC PARTS 4.2.6 Storage If the bicycle is not used for more than a month, it is better to store the battery: ● At 40% -60% of its capacity, charged once a month for 30 minutes.
  • Page 20: Display

    PARIS MAX 36V SCREEN 5. Display 5.1 Display specifications and parameters ● 36V / 48V power supply; ● Nominal current: 10 mA ● Maximum operating current: 30 mA ● Power off leakage current: <1 uA ● Operating current supplied to the regulator: 50 mA ●...
  • Page 21 PARIS MAX 36V SCREEN 5.2 Overview of functions and key definitions 5.2.1 Overview of functions ● Use of a bidirectional serial communication protocol, easy operation of the screen through the external 5-key keyboard. ● Speed display: Shows real-time speed as SPEED, maximum speed as MAXS, and average speed as AVG.
  • Page 22 PARIS MAX 36V SCREEN G. Level indication: the selected level 1-5 will be displayed; if there is no numerical display, it means that there is no assistance (from the engine). If the rider is walking and pushing the electric bike, will be shown.
  • Page 23 PARIS MAX 36V SCREEN 5.3.3 Switching between distance mode and speed mode Press briefly to switch between distance and speed. One-way distance (tRIP km) total distance (totAL km), Average driving speed (AVG km / h) are displayed in maximum speed (MAXS km / h) and successive order.
  • Page 24 PARIS MAX 36V SCREEN 5.3.5 Assistance in walking Press for 2 seconds. The e-bike enters walk assistance mode and the symbol appears WALK. When the key is released , the e-bike exits the walk assist mode. Switching between electric assist mode and mode...
  • Page 25 PARIS MAX 36V SCREEN 5.3.6 Battery status indication When the battery status is normal, a certain number of battery LCD display segments and the edge light, depending on the actual amount of charge. If all 10 segments turn off and the edge blinks, the battery should be charged immediately.
  • Page 26 PARIS MAX 36V SCREEN Menu to access parameter settings In parameter setting, when the parameter you want to set starts flashing, press the parameter value. Press briefly to adjust to switch between the parameters to be adjusted. Press twice (interval <0.3 seconds) to leave the submenu.
  • Page 27 PARIS MAX 36V SCREEN 5.4.5 Sensitivity to light If the velocity field shows bL0, use to choose a number between 0 and 5. The higher the number chosen, the greater the sensitivity to light. After this adjustment, short press screen backlight (<0.3 seconds) to access the interface...
  • Page 28 PARIS MAX 36V SCREEN 5.4.8 Maintenance notice (can be deactivated) If the speed field shows nnA, press After this setting, to choose 0 or 1. 0 deactivates the function and 1 activates it. press briefly (<0.3 seconds) to enter the password input setting interface.
  • Page 29 PARIS MAX 36V SCREEN 5.4.9 Battery menu information Information displayed in speed field b01 Explanation actual temperature maximum temperature minimum temperature total voltage stream average current remaining capacity full capacity relative state of charge absolute state of charge charge /...
  • Page 30 PARIS MAX 36V SCREEN 5.5 Error code definitions The MAX-C966 display can show the faults of the electric bike. When a fault is detected, the speed field icon appears, one of the following error . In the codes will appear:...
  • Page 31: Recommendations And Maintenance

    6.2 Maintenance schedule To keep your NCM bike in top condition and to get the most out of your riding experience, we recommend that you follow the suggested maintenance schedule. You should study it and let it become second nature to your driving.
  • Page 32 PARIS MAX 36V RECOMMENDATIONS AND MAINTENANCE Each Weekly- Monthly- Every 6 Annual- Maintenance program walk mind mind mind months Tire pressure Tire condition Visual inspection Brake lever pressure Quick release Handlebar alignment Saddle alignment Battery pack locked Checking the wheel Checking the condition...
  • Page 33: Troubleshooting

    How can I test the capacity of my battery? ● Contact NCM to arrange to return your battery for testing. If the battery has a capacity greater than 85% during the first year (from the date of purchase), you will be responsible for the return freight. If it is tested and is low capacity within the warranty period, your battery will be replaced.
  • Page 34: Definition Of Handling And Recommendations

    Please do not add, remove or modify parts of your bicycle in any way before consulting with a trained bicycle technician. We recommend that you check with us at NCM before making modifications or adding parts to confirm their safety and compatibility with your bike.
  • Page 35: Technical Data

    25 km / h In order to satisfy the needs of our customers as much as possible, NCM reserves the right to modify the characteristics of its products at any time, without prior notice. Contact an authorized NCM dealer for assistance.
  • Page 36 NCM Bikes GmbH Eckenerstraße 3 30179 Hannover Germany Tel .: +49 511 - 897 938 22 Fax: +49 511 - 897 938 29 info@ncmbikes.com www.ncmbikes.com HES04...

Table of Contents