Field Of Application - WAGNER W985E Manual

Click&Paint Adapter
Before operating the adapter, please read the operating instructions for the
basic unit and the relevant spray attachment thoroughly.
Please note all safety instructions in particular.
Additional safety instructions for operation of the adapter with a spray
attachment
•
The spray attachment may only be operated with a functional valve.
in the ventilating hose (Fig. 4, item 3) do not operate the unit further! Dismantle
and clean the ventilating hose, valve and diaphragm and replace the diaphragm if
necessary.
•
Do not lay the spray gun.

Field of application

The Click&Paint adapter enables all Wagner Click&Paint spray attachments to be
used with the W985/W925.
Assembly
Only the air hose is required for operating a spray attachment with the
i
W985/W925. To facilitate handling, the material hose can therefore be
removed from the air hose and the suction hose can be detached from
the basic unit.
1) Attach the Click&Paint adapter (Fig. 1, 2) with the bayonet coupling to the thinner
end of the air hose (1).
2) Insert the other end of the adapter into the gun handle (3).
3) Connect gun handle and spray adapter together. (Fig. 2)
4) Unscrew the container from the spray gun.
5) Aligning suction tube.
If the suction tube is positioned correctly, the container contents can be
sprayed without almost any residue.
When spraying horizontal surfaces, turn suction tube forward. (Fig. 3 A)
When spraying objects overhead, turn suction tube back. (Fig. 3 B)
Adjusting the desired Spray Setting (Fig. 4)
Three different spray jet settings can be chosen on the spray gun, depending on the
application and target object.
WARNING!
With the union nut (1) slightly unscrewed, turn the air cap (2) to the desired spray-setting
position (arrow). Then tighten the union nut.
Fig. 5 A = horizontal flat jet
Fig. 5 B = vertical flat jet
Fig. 5 C = circular jet
(Fig. 3)
Danger of injury!
Never pull the trigger guard while adjusting the air cap.
for horizontal surfaces

for vertical surfaces

for corners, edges and hard-to-reach surfaces

GB
If paints rises
15