To Change The Setting On The Playback Control Screen - Sharp SD-AT100W Operation Manual

Various settings (continued)
SD-AT00W
ENGLISH
On the playback control screen, various settings can be changed at the same time.
[Back]
! To change the setting on the playback
control screen
1
Whilst a disc is playing, press the PLAY CONTROL button.
2
Press the or button to select the item, and press the ENT but-
ton.
Example: DVD
1 Title number
2 Chapter number
3 Elapsed play time
4 Subtitle
5 Angle
6 Audio language
7 Gamma
8 Super picture
9 BITRATE indicator (unchangeable)
E-45
1
2 5 /
2
8 3 / 0
D D V
3
0 1 : 3 0 0 8 :
1 E NG L I S H
4
1
5
1
0 0 10
6 ON
G BIT RATE
Mbps
ON
SELECT
S
7
ENTER ENTER RETURN
8
9
3
Press the , , or button to change the setting and press the
ENT button.
Example: Gamma is selected
(The number of repetition depends on the setting item.)
To change other settings, begin from step 2.
4
Press the PLAY CONTROL button.
The setting is memorised and the playback screen reappears.
Notes:
" Some items may not be selected depending on the type of the disc.
" If the RETURN button is pressed whilst selecting an item or setting, the previ-
ous screen appears.
To select items directly, use the following buttons.
(Refer to pages 33 - 34 and 39 - 41 for details.)
Item Button
Direct title Press the DIRECT but- Angle
skip ton once.
Direct chap- Press the DIRECT but- Audio lan-
ter skip ton twice. guage
Direct time Press the DIRECT but- Gamma
skip ton 3 times.
Subtitle Press the SUBTITLE Super picture
button.
02/2/27 SD-AT100W(X)E5.fm
2 L P CM N 1 5. h c
0 0 10
ON
G BIT RATE Mbps
ON
SELECT
S
ENTER ENTER RETURN
Repeat the operation as instructed.
Item Button
Press the ANGLE but-
ton.
Press the SOUND
button.
Press the DIGITAL
GAMMA button.
Press the DIGITAL
S.PICTURE button.