Enhancing Your System - Sharp CD-BK250W Operation Manual

Enhancing Your System

The connection lead is not included. Purchase a commercially available lead as
shown below.
Red White
E-29 ENGLISH
„ Listening to the playback sounds from
VCR, DVD, etc.
VCR, DVD, etc. 1
Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
AUX sockets.
When using video equipment, connect the audio output to this unit and the video
output to a television.
2
To the
Press the ON/STAND-BY button to turn the power on.
line output
sockets 3
Press the VIDEO/AUX button.
4
Play the connected equipment.
White
Red
Note:
To prevent hum interference, place this unit away from a television.
„ To record on a tape
1
Insert a cassette in the TAPE 2 cassette compartment.
RCA lead
(not supplied) 2
Press the VIDEO/AUX button.
3
Press the REC PAUSE
4
Press the
5
Play the VCR, DVD, etc.
„ Headphones
z Before plugging in or unplugging the headphones, reduce the volume.
z Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
z Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
( ) button.
( ) or button.
01/3/8 CD-BK250W(X)E3.fm