Kenwood KCA-R71FM Instruction Manual page 18

Troubleshooting Guide
The messages shown below display your systems condition.
EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
Load the disc magazine properly.
➪
NO DISC: No disc has been loaded in the disc magazine.
Load a disc into the disc magazine.
➪
TOC Error: No disc has been loaded in the disc magazine.
Load a disc into the disc magazine.
➪
The CD/MD is quite dirty. The CD is upside-down. The CD is scratched a lot.
Clean the CD/MD and load it correctly.
➪
BLANK DISC: Nothing has been recorded on the MD.
The next MD will automatically be played.
➪
No Track: No tracks are recorded on the MD, although it has a title.
The next MD will automatically be played.
➪
E-12: Now reading the data in the disc.
Normal playback is resumed upon completing the reading of the disc data.
➪
E-77: The unit is malfunctioning for some reason.
Press the reset button on the display unit. If the "E-77" code does not disappear, consult your nearest service center.
➪
Mecha Error: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
Check the disc magazine, and then press the reset button on the display unit. If the "Mecha Error" code does not
➪
disappear, consult your nearest service center.
Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),
stopping all operation.
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C
➪
(140°F), the disc will start playing again.
E02
E04
E77
E77
E77
E0d
— 18 —
E77
E01
E99