Table of Contents
Advertisement
Basic operations of remote control
Tuner M ode
• Number/ letter entry buttons
Press buttons #1-6 to recall preset stations.
During direct access tuning, use these buttons to input the
frequency of the station.
• TUNE buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the ¢ button to make increasing seeks (using the preset
tuning mode).
• AM/FM button
Press the AM button to select the M W and LW bands.
Press the FM button to select and sw itch betw een FM 1, FM 2,
and FM 3 bands.
• DIRECT/OK button
Selects the direct access tuning mode, used to input
frequencies directly. Press this button again to cancel the mode
w hilst it is operating.
During Station name preset play mode, selects station.
• DNPP button
Enters and cancels the Station Name Preset Play mode.
Downloaded from:
http://www.usersmanualguide.com/
(See page 8) Optional
Tape M ode
• T.ADV buttons
Press the 4 button to start play again at the beginning of the
current track.
Press the ¢ button to start play at the beginning of the next
track.
• REW button
Rew inds the tape.
• FF button
Fast forw ards the tape.
• PROG button
Plays the reverse side of the tape. When pressed during fast
forw ards and rew inds, this button stops the tape and starts
playing it.
— 36 —
Advertisement
Table of Contents
