Special Notes; Maintenance - Sharp QT-CD131H Operation Manual

YT

SPECIAL NOTES

● If the model name contains a parentheses, the
● Recording and playback of any material may
● This equipment complies with the requirements
● When the FUNCTION switch is set at STAND-BY
Warning:
This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation
and when not in use for a long period.
ACCESSORY

MAINTENANCE

■
Internal care
● Do not touch the Laser pickup lens. If fingerprints
● Dirty heads, capstan or pinch roller can cause
● After long use, the deck's heads and capstan
Downloaded from: http://www.usersmanualguide.com/
<P=001>
letters in the parentheses indicate the colour of
the product. Operation and specifications are
unaffected.
require consent, which SHARP is unable to give.
Please refer particularly to the provisions of the
Copyright Act 1956, the Dramatic and Musical
Performers Protection Act 1958, the Performers
Protection Acts 1963 and 1972 and to any sub-
sequent statutory enactments and orders.
of Directives 89/336/EEC and 73/23/EEC as
amended by 93/68/EEC.
position, mains voltage is still present inside the
unit.
AC power lead × 1
or dust accumulate on the pickup, clean it gently
with a dry cotton swab.
poor sound and tape jams. Clean these parts
with a cotton swab moistened with commercial
head/pinch roller cleaner or isopropyl alcohol.
may become magnetised, causing poor sound.
Demagnetise these parts once every 30 hours of
playing/recording by using a commercial tape
head demagnetiser. Read the demagnetiser's
instructions carefully before use.
Warning:
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing liquids.
Caution:
● Use of controls, adjustments or performance of
procedures other than those specified herein
may result in hazardous radiation exposure.
As the laser beam used in this compact disc
player is harmful to the eyes, do not attempt to
disassemble the cabinet. Refer servicing to
qualified personnel only.
Parts and accessories mentioned in this operation
manual other than those in the drawing are not
included.
Note:
● The AC power lead is located in the polystyrene.
■
External care
● Periodically wipe the cabinet with a soft cloth and
a diluted soap solution, then wipe with a dry cloth.
● Do not use chemically treated cleaning cloths or
other chemicals.
1
QT-CD131H(SUK) TINSE0007SJZZ