Rinnai Pipe Cover Installation Instructions

For Use With Rinnai Condensing Tankless Water Heaters
•
Before installation, please make sure that all parts are located inside the product box. If any items are missing or
damaged, contact your local dealer/distributor or contact Rinnai.
•
For installation related inquiries concerning this product please contact Rinnai, see the Installation and Operation
Manual for your local Rinnai Help Line contact details.
ITEMS INSIDE PRODUCT BOX
Item #
1 Bottom Frame
2 Left Panel
3 Right Panel
4 Front Panel
5 L Bracket
6 Plastic Retaining Clip
7 Screw M4 X 12
8 Plastic Washer M4
9 Wall Anchor
10 Screw Ø4.8 X 32
*Four of the M4 X 12 screws ⑦ and four of the M4 plastic washers ⑧ are not required for Australian installations.
TOOLS/MATERIALS REQUIRED:
NOTICE
An approved weatherproof electrical GPO can be located inside the pipe cover. Installation of the
GPO must comply with AS/NZS 3000 Wiring Rules (Australia and New Zealand installations only)
INSTRUCTIONS
Initial Assembly
1. Secure the two bottom frames ① to the left panel
② and right panel ③ with screws ⑦and plastic
washers ⑧ .
Pipe Cover Enclosure Installation Instructions
(Please contact Rinnai for model compatibility)
Item Qty
12
12

Phillips head screwdriver
Copyright © 2018 Rinnai America Corporation. All Rights Reserved.
INSTALLATION INSTRUCTIONS
Pipe Cover Enclosure
1
2
1
1
1
2
2
6
2
2

Drill
2 3
7 9
8
2
1
1
4
5
10
3
8
7