Focus Function Settings - JVC Connected Cam GY-HC550U Instructions Manual

Focus Tracking
For specifying whether to track the focus during
zooming.
On:
0
Tracks the focus during zooming.
Off:
0
Gives priority to the zoom speed and does not
track the focus during zooming.
[Setting Values: ROn, Off]
Memo :
Zoom speed may be affected when zooming is
0
performed near the tele-end.
Preset Zoom
For setting the speed for shifting to the preset zoom
position and the rate of change for starting and
stopping the preset zoom operation of the preset
zoom function assigned to the user button.
9 Speed
For setting the speed to shift to the preset zoom
position.
[Setting Values: 1 to 21 (R11)]
9 Ease In
For setting the rate of change from the start of the
zoom operation until the predetermined [Speed] is
reached.
The larger the setting value, the longer it takes to
reach the value specified in Speed.
[Setting Values: 1 to 5, ROff]
9 Ease Out
For setting the rate of change from the
predetermined [Speed] until the zoom operation
stops.
The larger the setting value, the longer it takes
before the operation stops.
[Setting Values: 1 to 5, ROff]
REMOTE Zoom Ease
For specifying whether to zoom in or zoom out
slowly when zoom operation starts or during
zooming using a wired remote control.
[Setting Values: ROn, Off]
Web Zoom Ease
For specifying whether to zoom in or zoom out
slowly when zoom operation starts or during
zooming using the View Remote feature.
[Setting Values: ROn, Off]
114
Camera Function Menu

Focus Function Settings

AF Assist
For specifying the behavior when the focus ring is
turned during AF.
Direction:
0
This option allows you to shift the auto focus
point to near and far directions by turning the
focus ring during AF.
Manual:
0
Temporarily switches to MF when the focus ring
is turned during AF.
Off:
0
Sets the AF Assist function to "Off".
[Setting Values: Direction, Manual, ROff]
Memo :
This setting is effective only when the [FOCUS]
0
switch is set to "AUTO".
AF Speed
For setting the AF operation speed.
[Setting Values: Fast, RMiddle, Slow]
AF Sensitivity
For specifying the sensitivity of AF in response to
changes in the photographic subject.
High: High sensitivity
0
Middle: Normal
0
Low: Low sensitivity
0
[Setting Values: High, RMiddle, Low]
AF Area
For configuring the AF area.
Multi:
0
Automatically configures to an area optimal for
recording.
Wide:
0
Extends the AF area sideways.
Normal:
0
Performs AF at the area near the center of the
image.
[Setting Values: Multi, Wide, RNormal]