Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Husqvarna WT2GO
Summary of Contents for Husqvarna WT2GO
- Page 1 WT2GO Constant Pressure Water Supply Unit OPERATOR’S MANUAL...
-
Page 2: Table Of Contents
SAFETY INFORMATION ............................3 SAFETY DECALS ..............................4 PRODUCT DESCRIPTION AND SPECIFICATIONS ....................4 OPERATION ..............................6 BEFORE USE ................................ 6 MAINTENANCE ..............................8 GENERAL RECOMMENDATIONS: ........................9 WT2GO SPECIFIC MAINTENANCE ........................9 STORAGE ............................... 10 TROUBLESHOOTING............................11 SPARE PARTS ..............................12... -
Page 3: Introduction
Keep this manual or a copy of it with the machine. If you lose this manual or need an additional copy, please contact Husqvarna. This machine is designed and built with user safety in mind; however, it can present hazards if improperly operated and/or serviced. Please follow the operating instructions carefully. -
Page 4: About This Manual
This manual uses the following symbols to help differentiate between different kinds of information. The safety symbol is used with a key word to alert you to potential hazards in operating and owning WT2GO. Follow all safety messages to avoid or reduce the risk of serious injury or death. KEY TERMS READ CAREFULLY –... -
Page 5: Product Information
Failure to follow instructions could result in serious injury or death. WARNING Husqvarna WT2GO is designed for ease of use and safety. However, damage to the device and personal injury is possible if used incorrectly. Instruct all operators in care and use of the WARNING machine before use. -
Page 6: Safety Decals
• Risk of electrocution. • Be aware of electrical hazards whilst performing task as WARNING contact with power source may cause electric shock. SAFETY DECALS (At rear also) (Concealed in base) Prop65-warning WT2GO - User Manual Page 4 of 15... -
Page 7: Product Description And Specifications
PRODUCT DESCRIPTION AND SPECIFICATIONS The Husqvarna WT2GO is a constant pressure water supply device. It is designed and engineered to simplify the process of supplying water in situations where regular hosing is difficult. The WT2GO includes a multi-function nozzle, an on/off valve, 3 metres of reinforced hose, all mounted on a compact two chamber frame design. -
Page 8: Operation
1.2 Ensure all fittings are tight (do not over tighten using tools as damage may occur to fittings). NOTE: IMPROPER treatment of WT2GO can damage it and shorten its working life. DO NOT attempt to open device to alter or to repair it. This must ONLY be done by Husqvarna approved service technician. - Page 9 FILLING Using high-pressure pumps, direct connection to water mains or other high-pressure sources to fill WT2GO that exceed rated WARNING pressure (70 psi) will void warranty. - Only use water. - DO NOT mix with oil, detergents, etc. - DO NOT modify device in any way.
- Page 10 2.4 Allow WT2GO to fill. 2.5 Turn tap off 2.6 Remove the hose plug/connector from the tap 2.7 Connect the WT2GO to desired application and use as required (i.e. concrete cutter, core drill, etc.) WT2GO - User Manual Page 8 of 15...
-
Page 11: Maintenance
Clear Debris Before use, clear debris from hose line. If debris has entered the hose line disconnect from WT2GO base (be aware that if the device is full water will spray out) and connect the free hose to a tap, flush... -
Page 12: Storage
STORAGE Long term storage instructions It is not advised to store a full WT2GO for long periods (weeks/months) as this may reduce performance of your product. Empty your WT2GO before long-term storage. Do not clean inside tanks with soaps or other cleaning agents/products, rinse with fresh water and empty. -
Page 13: Troubleshooting
TROUBLE SHOOTING GUIDE PROBLEM CAUSE REMEDY Valve faulty Inspect valve on hose Remove hose from WT2GO and flush with tap water from either end Blockage in hose Check for blockages at barbed fittings Pump does not fill Blockage in top cap Inspect inlet for debris Refer to applicable machine’s... -
Page 14: Spare Parts
CONNECTOR Quick Connect with Stop 598767801 (SPRAY GUN H2G-09) 598766301 SCREW on QC for Top Lid (Black New) 598766401 (ADAPTER 1/2-3/4-1 Tap adaptor H2G-08) 598766402 (ADAPTER 3/4" Tap Adapter GHTF USA/Canada H2G-08-01) WT2GO - User Manual Page 12 of 15... - Page 15 CONTACT INFORMATION For sales, service, warranty and part orders, please contact your local Husqvarna agent WT2GO - User Manual Page 13 of 15...