Dell Latitude 9410 Service Manual page 86
Hide thumbs
Also See for Latitude 9410:
- Setup and specifications manual (42 pages) ,
- Quick start manual (20 pages)
Table of Contents
Advertisement
NOTE:
System board can be removed with heatsink assembly attached.
12. Remove the
display
assembly.
13. Remove the battery.
14. Remove the
system
board.
15. Remove the keyboard.
1. After performing the preceding steps, you are left with palmrest assembly.
2. Transfer the post-requisite components onto the new palmrest assembly.
Details of the Power button with FPC
1. WWAN antenna module with antenna cables and FPCs (for models shipped with a WWAN card)
2. SmartCard reader with FFC (for models shipped with a SmartCard reader)
3. LED board with FFC
4. Touchpad with FPC
5. Wireless antenna module with antenna cables
6. NFC module with FPC (for models shipped with an NFC reader)
7. USH daughter board with FPC (for models shipped with a USH daughter board)
8. Fingerprint reader module with FPC (for models shipped with a Fingerprint reader)
9. Power button with FPC
1. Install the
keyboard
2. Install the
system board
3. Install the battery.
4. Install the
display assembly
5. Install the
heatsink
6. Install the speaker.
7. Install the fan.
8. Install the
WWAN
card.
9. Install the
WLAN
card.
10. Install the SSD.
11. Install the
coin cell
86
Removing and installing components
Advertisement
Table of Contents
