Table of Contents
Advertisement
8
Safety instructions for all operations
Safety Warnings common for grinding, sanding, wire brushing,
polishing, carving or abrasive cutting-off operations:
a) This power tool is intended to function as a grinder, sander,
wire brush, polisher, carving or cut-off tool. Read all safety
warnings, instructions, illustrations and specifications
provided with this power tool.
listed below may result in electric shock, fire and/or serious injury.
b) Operations such as polishing is not recommended to be
performed with this power tool.
tool was not designed may create a hazard and cause personal
injury.
c) Do not use accessories which are not specifically designed
and recommended by the tool manufacturer.
accessory can be attached to your power tool, it does not assure safe
operation.
d) The rated speed of the grinding accessories must be at least
equal to the maximum speed marked on the power tool.
Grinding accessories running faster than their rated speed can break
and fly apart.
e) The outside diameter and the thickness of your accessory
must be within the capacity rating of your power tool.
Incorrectly sized accessories cannot be adequately controlled.
f) The arbour size of wheels, sanding drums or any other
accessory must properly fit the spindle or collet of the power
Accessories that do not match the mounting hardware of the
tool.
power tool will run out of balance, vibrate excessively and may cause
loss of control.
g) Mandrel mounted wheels, sanding drums, cutters or other
accessories must be fully inserted into the collet or chuck.
the mandrel is insufficiently held and/or the overhang of the wheel
is too long, the mounted wheel may become loose and be ejected at
high velocity.
h) Do not use a damaged accessory. Before each use inspect
the accessory such as abrasive wheels for chips and cracks,
8
Failure to follow all instructions
Operations for which the power
Just because the
If
Hide quick links:
Advertisement
Table of Contents
