D-Link DGS-3630 Series Reference Manual page 93

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in AAA Authentication WEB-Auth are described below:
Parameter
Status
Method 1 ~ Method 4
Click the Apply button to accept the changes made.
After clicking the AAA Authentication Exec tab, the following page will appear.
The fields that can be configured in AAA Authentication Enable are described below:
Parameter
Status
Method 1 ~ Method 4
Click the Apply button to accept the changes made.
Description
Select to enable or disable the AAA Web authentication state here.
Select the method lists that will be used for this configuration here. Options to
choose from are:
• none - Normally, the method is listed as the last method. The user will
pass authentication if it is not denied by previous method authentication.
• local - Specifies to use the local database for authentication.
• group - Specifies to use the server groups defined by the AAA group
server. Enter the AAA group server name in the space provided. This
string can be up to 32 characters long.
• radius - Specifies to use the servers defined by the RADIUS server host
command.
Figure 7-7 Authentication Settings (AAA Authentication EXEC) Window
Description
Select to enable or disable the AAA authentication enable state here.
Select the method lists that will be used for this configuration here. Options to
choose from are:
• none - Normally, the method is listed as the last method. The user will
pass the authentication if it is not denied by previous method
authentication.
• enable - Specifies to use the local enable password for authentication.
• group - Specifies to use the server groups defined by the AAA group
server command. Enter the AAA group server name in the space provided.
This string can be up to 32 characters long.
• radius - Specifies to use the servers defined by the RADIUS server host
command.
• tacacs+ - Specifies to use the servers defined by the TACACS+ server
host command.
86