Aiphone IXG-FMK-2C7 Installation Manual

Installation Manual
Introduction
• Read this manual before installation and connection.
Read the "Installation Manual" included with IXG-2C7 or IXG-2C7-L.
Perform installation and connection only after gaining sufficient understanding of the
system and this manual.
Precautions
Notice
• The illustrations used in this manual may differ from the actual product.
Precautions for mounting
• Do not use an impact driver to fasten screws. Doing so may cause damage to the device.
Literature information
The important information concerning correct operation and what you should observe is marked with
the following symbols.
Restricts user actions / provides instructions.
How to Install
Installation of Tenant Station with Flush mount kit
Tenant Station (IXG-2C7, IXG-2C7-L) is sold separately.
Installation of Back Box
1. Make a hole for the cable.
Pass the LAN cable and low voltage cable through the opened hole.
IXG-FMK-2C7
(Flush mount kit for Tenant Station)
Part Names and Accessories
Front view
Panel & Frame
Included accessories
Installation Manual ×1 Frame-mounting Wall-mounting
(this manual) screws ×4 screws × 4
2. Install the back box in the wall.
<Front>
240 (9-7/16")
Opening dimension of wall
Recommended
Mounting height
(center of back box)
1,500mm (4' 11'')
255 (10-1/16")
265 (10-7/16")
Back Box dimension
<Underside >
12.5 (1/2")
Specifications
■ IXG-FMK-2C7
Mounting
Back box
Materials
Color
Dimensions
Mass
<Side>
40
(1-9/16")
Wall
Wall
12.5 (1/2")
Wall
How to install Tenant Station is described on the back.
Issue Date: Mar. 2020 FK2532 A P0320 RQ 60235
Flush wall-mounted
Panel: Self-extinguishing resin
Frame & Back Box: Self-extinguishing plastic
Panel & Frame: White
Back Box: Black
Panel & Frame: 290 mm (11-7/16") [W] × 199 mm (7-13/16") [H] × 30 mm
(1-3/16") [D]
Back Box: 265 mm (10-7/16") [W] × 169 mm (6-5/8") [H] × 40 mm (1-9/16") [D]
Panel & Frame: Approx. 110g (0.25 lbs)
Back Box: Approx. 220g (0.49 lbs)